Description

ONEIROI is a full-stereo synthesizer that easily creates dense atmospheres for hypnotic music or cinematic sound design. Featuring three oscillators, four effects, a looper, modulation with complex routing, and a randomizer.

At the core of module, there is a Sine Wave Oscillator, Wavetable/Supersaw, and a joyful Looper. This is followed by an FX section featuring a Multimode filter, a Resonator, a Delay, and a Reverb. The on-board randomizer creates instant patches at the touch of a button. The Looper can record the external input or the output with “Sound On Sound” looping.

ONEIROI – Build Document | User Manual

Features:

• Powered by the latest OWL revision (mk3), with 24-bit 48 kHz stereo audio (32-bit internal processing)
• Stereo input with three switchable gain levels and a two-coloured LEDs for monitoring and Stereo output
• 5-second looper with continuous speed control (from 2x in reverse direction to 2x in forward direction) and pre and post looping selector.
• Sine oscillator and Stereo Supersaw with detune control, inspired by the JP-8000
• 2048-sample dynamic wavetable oscillator (aliased) that uses the looper buffer, with offset control
• Single v/oct input for the three oscillators and unison control
• Filtering unit with four different types: low-pass, band-pass, high-pass, and comb filter. The filter can be freely positioned along the effects chain
• 3-band resonator with tune and feedback controls
• A 2-tap echo with controls over time and density
• Reverb with macro control for size, filtering, and direction
• Eight short-throw faders for controlling volumes (exponential) and effects amount (constant power), with relative CV inputs
• Eight CV controls for the primary parameters, four of them can be dynamically assigned to the secondary ones as well
• Possibility to record either the stereo input or the module’s output
• Various types of self-modulation with configurable routing and control over level and speed
• External synchronization via sync input (supported clock speed from 30 BPM to 300 BPM)
• Powerful randomizer with four different targets, three levels of intensity and undo/redo
• Soft take-over functionality for re-coupling parameters’ positions and values after randomization, with LEDs for showing where the value is in relation to the position of the control.

Specs:

• Current needs: +12V=200mA, -12V=60mA
• Width: 30 HP