Description

The Hexpander adds great functionality to the main Hexmix module. Featuring Three aux send with stereo returns, individual outputs for each channel, a complete PFL system and balanced master output. The Hexpander is designed to be placed above the Hexmix in a modular case – this allows every channel to be aligned as they would in traditional tabletop mixers.

Features

Auxiliary sends: For every channel you have three auxiliary sends. One pot will measure the amount of signal sent to each of them. Every auxiliary send has a volume pot, that will measure the level of the signal sent. There are two jacks available for each send – so it is possible to send the signal both pre or post fader/EQ at the same time. Returns are stereo, having a switch to select if the signal is coming from synth or line level. Like this levels can be set, for example, either for a guitar pedal or an FX module at modular level.

Monitor section: The Hexpander features a complete PFL system to send channels to to the headphones before you add them to main mix.
Flip PFL switch to send that channel to the headphones out. With the PFL/Master Pot you can crossfade between the master signal and every channel sent to PFL, The Headphones out has it’s own dedicated volume control. The Level meter will show the level of the sum of all active PFLs. When there is no PFL active, it will show master level.

Output section: Every channel has its own individual 6.35mm jack out at line level. Here you have the signal of every channel post EQ. Finally you have master balanced output.

Hexpander: User Manual | Build Document – All SMD components are already pre-soldered, only the mechanical parts needs to be assembled.

Specifications:

• Width: 28HP
• Depth: 27mm.
• Current needs: +12:90mA, -12:85mA, +5: 0mA